In the lesson I decided that I should work with
3D. I also continued with the clay work I started
last week.
The glass piece I had left for fusing last work was
done.
At first you couldn't see through it as there was plaster
stuck to the back. After I cleaned it off if became visible
the glass melted well and the colours changed as
expected.
I then continued to make the mold for the glass
bending.
I made a mixture of plaster and molocite and
poured this onto the clay mold. It took about an
hour or so to set.
This will be put into the kiln and the glass will melt
into the shape of the mold.
Kate made us do a quick make session where we
had to make something in 3D with the materials
provided and connected to our project.
It's just something totally random. lol
After that I made some 3D objects with some metal
mesh. These designs ideas were developed from
the long exposure photography (light painting) I did
ealier on.
I will continue to develop small 3D models and also
developing my ideas using CAD software, including
SketchUp.
No comments:
Post a Comment