3D Design 11/10/2010

Yesterday in 3D design I started making my final piece. I would have finished it but I had a little trouble. One, I needed to cut more wire out.  Two, I decided not to spot weld my pieces together as they won't be acurate plus I didn't have enough time to spot weld that many pieces together. Instead I decided to use wire, but the thin wire had finished.  I tried is with a slightly thicker one, but that didn't hold the pieces together. I then tried using a hot glue gun which worked perfectly fine...my thought was why didn't I do this first...wouldn't have wasted so much time trying other methods, lol.




It's going good.  Now I can finish it off quickly